Find a Club

MCF member clubs welcome new members of all levels. Here are just a few.
Saint Paul Bicycle Racing Club
Contact:  Tim LaBerge
Website:  Bianchi/Grand Performance
Twin Cities Spoke of the IC3
Contact:  Jeannie Scholz
Contact:  Jared Roy
Website:  Crossniacs

Find a race

No events scheduled

Track wheels are built to be stiffer and withstand more torque than road wheels.  So, high-flange hubs, stiffer rims, and beefier spokes are common.  But given the quality of most standard road wheels these days, the differences in strength and stiffness between track and road wheels perhaps aren’t as great as they used to be.  In fact, if you could get rid of the quick release on a front road wheel, you could probably use it on your track bike without a problem.

Why can’t you have a quick release on the front wheel of your track bike?  In the “old days”, quick releases were straight and were liable to poke riders in the event of a crash.  So they weren’t favored for track racing, since a quick wheel change at the side of the road was never necessary.  That convention stuck.  

Perhaps more to the point, you really can’t have a quick release on the rear wheel, so why bother having one on the front?  You’ll need a wrench either way.  For the rear wheel, a quick release would likely not hold the dropout solidly enough to prevent the wheel from pulling on a standing start or hard acceleration.  So you really do need bolt-on axles on the rear wheel; it’s not just tradition.

Of course, the fact that there are no quick releases on track wheels means that the axles are solid (quick-release axles are, of course, hollow), and solid axles are stronger.  Axle strength isn’t the reason track bikes don’t have quick releases, but at least for the rear axle, it’s a nice benefit.

Add this page to your favorite Social Bookmarking websites
Digg! Reddit!! Mixx! Free and Open Source Software News Google! Live! Facebook! StumbleUpon! Yahoo! Free Joomla PHP extensions, software, information and tutorials.